Magnum Cable 101705 X-treme Control set underfloor heating 100 meter - 1700 Watt

Magnum Cable underfloor heating

The MAGNUM Cable is specifically designed for installation in cement screed floors. The cable spacing determines the power per square meter. This gives you the flexibility to install more power (for faster response and higher temperatures) or less power (for constant or lower temperatures). The deformable nature of the cable makes installation easy. It can be attached to MAGNUM Isoroll and dovetail plates using aluminum tape, or to concrete mesh using cable ties. Convenient spacer strips are also available for direct installation on the floor.

The advanced thermostat takes into account the required warm-up time, ensuring that your floor always reaches the desired temperature at the desired time. The absence of radiators on the walls provides optimal freedom in interior design.

Sample calculations for cable spacing:

To calculate the correct cable spacing, divide the total number of square meters of free floor space by the total power of the set. Multiply the result by 17 (17 = watts per linear meter of cable). The first two decimal places indicate the cable spacing in centimeters.

Examples of supplementary heating:

500 watt cable on 3 m²: (166 W/m²) (3 m² / 500 watt) x 17 W/m = 0.102. Install the cable with a spacing of 10 cm. 1000 watt cable on 7 m²: (142 W/m²) (7 m² / 1000 watt) x 17 W/m = 0.119. Install the cable with a spacing of 11 to 12 cm.

MAGNUM Cable is supplied as a complete set, including:

• Heating cable
• MAGNUM X-treme Control programmable thermostat
• Floor sensor
• Flexible tube for the floor sensor
• Mounting tape
• Installation instructions

Warranty:

MAGNUM Cable has a lifetime warranty on the electrical operation of the heating cable and a 2-year warranty on the thermostat and floor sensor.

Technical specifications:

• EMC-free 2-conductor cable
• 2.5-meter three-core power cable
• Unique blind connection between heating and supply cable
• Complete enclosure with aluminum earth sheath
• Chrome/nickel resistance wire
• XLPE insulation
• PVC protective jacket
• 17 watts per meter power, 230 volts
• Cable diameter: 7 mm
• Produced and tested in accordance with IEC 800 standards
• NEMKO approved and CE certified within Europe

The cables are available in total powers ranging from 300 to 3300 watts, suitable for areas between 2 and 30 m². Since the cable is interconnected at one end, there is only one supply cable, which is invisibly connected using the unique connection. Therefore, no return cable needs to be laid back to the thermostat.

Installation: